JET JW1317 4" Wire Hose Clamp - Each

This page features a wealth of information related to

jet jw1317 4" wire hose clamp - each

Product Image

JET JW1317 4" Wire Hose Clamp - Each

Wire hose clamp connects flexible piping to dust hoods, blast gates, and fittings
Wire hose clamps
4-inch-diameter

List Price: $2.36
Lowest Price: $0.74

Amazon.com Product Description:

The Jet 4-Inch Wire Hose Clamp connects flexible piping to dust hoods, blast gates, and fittings. These 4-inch-diameter wire hose clamps come in a pack of two.

Customer Reviews:

Rating:
Date: 2008-05-22
Its a Clamp
Um, its a clamp. It holds things tight. Sorry I can't really write a paragraph on a hose clamp. It does what its supposed to do, and it does it well.

Rating:
Date: 2006-07-12
Great Clamp!
I used a whole lot of these when I set up my dust collection system, and I can say that the hype is justified. These thin metal clamps slip between the ridges on the flex hose perfectly to create a very air-tight connection. I also appreciate the phillips head on the tightening bolt - it makes it a lot easier to crank these down quickly with a drill/driver.

A word of advice - I found these clamps to be A LOT cheaper at Menards.

Rating:
Date: 2006-06-12
Looks like the price is back down to $1
I see that Amazon lowered the price back down to $1. At the time of my original review, they price was up around $4...hence the 1 star. The product itself works as advertised, so I give it 5 stars.

Rating:
Date: 2005-10-21
Works better than hose clamps
These clamps work well on ventilation hose that you would use in a dust collection system. They are much cheaper and they clamp tight. Regular hose clamps slip because of the ribs in the hose.

Rating:
Date: 2005-02-17
Excellent Permanent Clamp
I recommend these clamps to anyone who needs to permanently clamp their 4" hose to an outlet, adapter, inlet, etc. They form a good tight seal and do not fall off once properly tightened down.
I would not recommend these type clamps for an application where you would be moving the hose to different tools or positions. Reason being, one you would have to get your screw driver or socket wrench out, and two because the wear and tear of the clamp tightening on the hose over and over again would eventually wear a hole in the hose.

If you'd rather see information unrelated to jet jw1317 4" wire hose clamp - each, try a Search.

Other Products: